This machine is a kind of metallographic sample cutting machine controlled by PLC. It adopts Schneider Electric and Mitsubishi software to automatically and accurately control the X, Y and Z directions. The intelligent cutting can change the cutting amount according to the hardness of the material to achieve the fastest cutting effect. Cutting speed variable frequency control, with very high reliability and control ability, has: (1) electronic handwheel, automatic random conversion, (2) touch screen display various cutting data, (3) precise positioning, (4) swing cutting, continuous cutting two function cutting methods, cutting The cutting speed can be changed according to the hardness of the material to achieve the purpose of rapid cutting. In order to facilitate the cleaning of the cutting chamber and the safety of the spindle motor, we have adopted the machine and electric separation; the safety guard cover of the cutting chamber has an oversized observation window, which makes it easy for the user to observe the whole process of cutting the sample; the LED lighting lamp is installed in the cutting chamber to realize Effective illumination of the area used in the entire cutting room; the biggest features: low noise, easy operation, beautiful appearance, safe use, is one of the necessary equipment for laboratory sample preparation.

Body form: vertical. There are mainly upper (safety cover), middle (rack), side open door, side open door, lower frame (electric box, tool box), fixture, flushing faucet, cooling water tank (independent).
Inverter motor directly connected to the cutting blade, stepless speed regulation, concise design, sturdy structure, direct drive provides power transmission between the motor and the cutting piece, and ensures high efficiency, low noise, minimum maintenance and longer Service life.
Designed for high-volume cutting of large workpieces, it makes it easier to maintain machine parts and handle large workpieces. Sliding doors and hinged doors give you more space and unlimited access, making it easier to load large workpieces in the right place. It is also possible to feed the workpiece into the cutting chamber from the top left and the left.
The work area is fully enclosed and has a transparent shield for viewing during cutting. A cooling water tank is provided for storing the coolant, and tap water should not be used as the coolant. After the cutting work is completed, rinse the faucet with the left side, flush the indoor waste and close the safety door.
Main parameter：
Control method：manual/automatic，three axes association，Performance features: double LED lighting
Cutting wheel specification：400*32*3mm(we will investigate if can change to 500mm dia.)
cutting ways：cut cutting (vertical)、Flat push cutting (horizontal)
Y axle max. range：200mm
X axle max. range：150 mm
Z axle max. range：220 mm
Maximum cut section :∮160
variable frequency motor：7.5kw, 
rotate speed：500-2800r/min
Coolant capacity with pump：120L
dimension：1650×1350×1900mm
dimension：about 2500kg
Working table size: 550*280mm, 550*170mm. Middle 12mm.